Installation Tips

Wet Fit – Excavate the area down between 100 – 150mm.

If you are placing a frame, please install this before you carry out any of the aggregate work.

You will need to ensure you have the appropriate aggregate for the base work. We would recommend MOT Type 1 and either a sharp sand or a granite dust. A heavy duty weed suppressant membrane should be placed down before the artificial grass.

Lay the grass down over the area and if using a frame, pin this every ½ metre – 1metre.

If you have not placed a frame down, you will need to apply a dry kiln sand and have this brushed/blown into the bottom of the pile of the artificial grass. Using 1 25kg bag per 3 – 5m2.

Dry Fit – ensure you have a sufficient layer of weed suppressant membrane down on the decking/paving before you install the grass.

For decking, you can nail the grass onto the boards.

For paving, we sell concrete adhesive which can be used to bond the grass to the paving.